Brother 2270DW reset directions

To reset the drum light:

  1. Put the drum unit and toner cartridge assembly back into the machine. Do not close the front cover yet.
  2. press and hold down the GO button for 4 seconds until all the LEDs light up. Once all four LEDs are lit, relese the GO button.
  3. Close the front cover.
  4. make sure that the LED drum light is now off.

To reset the toner light:

  1. open the front cover and leave open while completing the following steps.
  2. turn the printer off.
  3. hold the GO button while turning the printer on. All lights should be on.
  4. Release the GO button.
  5. Press the GO button 2 times.
  6. Pause. All panel lights should be on.
  7. Press the GO button 5 times.
  8. The toner light should be off.
  9. The paper light should be on or flashing.
  10. Close the cover. The ready light should be the only light on.